Roofing Estimate Calculator (Shingle Replacement)
Enter the roof area, pitch, stories and layers to tear off, plus ridge and eave lengths. The calculator adds waste, works out squares, shingles, underlayment, ice and water shield, ridge cap and drip edge, and prices tear-off, install, decking repairs and dumpsters.
before sales tax$9,828.30
| Labor | |
| Tear off 1 layer and dry-in18 hr × $65.00 | $1,170.00 |
| Install underlayment, flashing and shingles (22 sq)35.5 hr × $65.00 | $2,307.50 |
| Replace damaged decking (4 sheets)2 hr × $65.00 | $130.00 |
| Materials | |
| Architectural shingles73 bundle × $45.60 | $3,328.80 |
| Synthetic underlayment3 roll × $114.00 | $342.00 |
| Ice and water shield, eaves and valleys3 roll × $138.00 | $414.00 |
| Ridge cap shingles2 bundle × $81.60 | $163.20 |
| Drip edge18 piece × $14.40 | $259.20 |
| Nails, vents and flashing allowance25 square × $10.80 | $270.00 |
| Decking, 7/16 OSB4 sheet × $38.40 | $153.60 |
| Disposal | |
| Dumpster and disposal2 load × $570.00 | $1,140.00 |
| Permits | |
| Roofing permit1 ea × $150.00 | $150.00 |
| Total before tax | $9,828.30 |
- Check local code for ice and water shield and ventilation requirements.
Labor at $65/hr, 20% markup on materials, equipment and disposal. Material prices and crew speeds are starting values; set your own in the app.
Send this as a quote from the driveway
In Curbsend, this calculator runs with your own prices and speeds, turns the result into an itemized quote with good, better and best options, and texts it to the customer to approve and pay a deposit from their phone.
Start 7-day free trialNo card needed.
Pricing tips for roofing
- Steeper pitches slow the crew and need more staging. Confirm the pitch on site before you send.
- Each extra layer to tear off adds labor and dumpster weight. Ask, or check at the eave, before you quote.
- Curbsend can pull roof area and pitch from satellite data for the job address, so you can quote before you climb.
Starting values this calculator uses
Material costs and crew speeds vary by market and by crew. These are the defaults; in the app you replace them with your own, and every estimate uses your numbers.
- Architectural shingles$38/bundle
- Synthetic underlayment (10 sq roll)$95/roll
- Ice and water shield (2 sq roll)$115/roll
- Ridge cap$68/bundle
- Drip edge, 10 ft$12/piece
- Coil nails and vents allowance$9/square
- Decking sheet, 7/16 OSB$32/sheet
- Tear-off hours per square per layer0.8 hr
- Install hours per square1.6 hr
- Dumpster (about 15 sq per load)$475/load
- Permit fee$150
More free contractor calculators
- Interior paintingWalls, ceilings, doors and trim from room sizes.
- Exterior paintingSiding, trim, doors and shutters from the house outline.
- LandscapingMulch volume, planting and sod from areas and counts.
- HandymanAdd up common small jobs with a trip minimum.
- HVACSize and price a split system from the home's square footage.
- PlumbingCommon replacements with parts allowances.
- ElectricalOutlets, lights, new circuits, EV chargers and panels.
- FlooringLVP, laminate, hardwood or carpet with waste and removal.
- DrywallSheets, mud and tape from wall and ceiling area.
- ConcreteYards of concrete, base, forms and finish.
- FencingPosts, panels and gates by the foot.
- DeckingFraming, decking, railing and stairs from the deck size.
- GuttersSeamless gutters, downspouts and guards by the foot.
- SidingSquares of siding, wrap and trim from wall area.
- Windows and doorsUnit prices plus install, trim and disposal.
- TileTile, backer, setting materials and layout difficulty.
- Pressure washingSoft wash, concrete and decks by area, with a job minimum.
- House cleaningStandard, deep or move-out, with recurring discounts.
- Lawn careMowing, fertilizing, aeration and cleanups for a season.
- Tree serviceCrew time by tree size, stump grinding and haul-away.
- Pest controlInitial service plus a recurring plan for 12 months.
- Junk removalPrice by truck volume plus special-item fees.
- InsulationBags to reach a target R-value, plus air sealing.